How much you can expect to pay based on the texture method

Texture can range from $0.5 - $3.00 per square foot

1. Knockdown: This texture method involves spraying a mixture of drywall compound and water onto the wall and then knocking it down with a trowel to create a textured look. The cost for knockdown texture can range from $1.00 to $3.00 per square foot, depending on the complexity of the job.
2. Orange Peel: This texture method involves spraying a mixture of drywall compound and water onto the wall and then using a sprayer to create a textured look. The cost for orange peel texture can range from $0.75 to $2.50 per square foot, depending on the complexity of the job.
3. Popcorn: This texture method involves spraying a mixture of drywall compound and water onto the wall and then using a sprayer to create a bumpy, popcorn-like texture. The cost for popcorn texture can range from $1.00 to $3.00 per square foot, depending on the complexity of the job.
4. Smooth: This texture method involves applying drywall compound to the wall to create a smooth, flat surface. The cost for smooth texture can range from $0.50 to $2.00 per square foot, depending on the complexity of the job.

Texture drywall based on the complexity and method used.

Method	Complexity	Cost Range
Knockdown	Simple	$1.00 – $1.75 per sq. ft.
	Moderate	$1.50 – $2.25 per sq. ft.
	Complex	$2.00 – $3.00 per sq. ft.
Orange Peel	Simple	$0.75 – $1.50 per sq. ft.
	Moderate	$1.25 – $1.75 per sq. ft.
	Complex	$1.50 – $2.50 per sq. ft.
Popcorn	Simple	$1.00 – $1.50 per sq. ft.
	Moderate	$1.50 – $2.00 per sq. ft.
	Complex	$2.00 – $3.00 per sq. ft.
Smooth	Simple	$0.50 – $1.00 per sq. ft.
	Moderate	$0.75 – $1.25 per sq. ft.
	Complex	$1.00 – $2.00 per sq. ft.

Please note that these prices are for labor only and do not include the cost of materials or any additional preparation work that may be required. The actual cost may vary depending on the size of the area, the texture type, and the complexity of the job.

We hope this comparison table is helpful in understanding the cost of texture drywall and choosing the right method and complexity for your needs.

Comparison table outlining the cost of materials for each type of drywall texture.

Method	Material	Cost Range
Knockdown	Drywall Compound	$10 – $20 per 5-gallon bucket
	Water	$0.50 – $1.00 per gallon
Orange Peel	Drywall Compound	$10 – $20 per 5-gallon bucket
	Water	$0.50 – $1.00 per gallon
Popcorn	Drywall Compound	$10 – $20 per 5-gallon bucket
	Water	$0.50 – $1.00 per gallon
	Popcorn Texture Mix	$12 – $15 per bag
Smooth	Drywall Compound	$10 – $20 per 5-gallon bucket
	Water	$0.50 – $1.00 per gallon

Please note that the cost of materials can vary depending on the brand and quality of the products used, as well as the size of the area being textured.

 

Comparison table outlining the approximate surface area that can be covered with one bucket of drywall compound for each type of drywall texture.

Method	Surface Area Covered per Bucket
Knockdown	150 – 200 square feet
Orange Peel	150 – 200 square feet
Popcorn	75 – 125 square feet
Smooth	200 – 250 square feet

Please note that the surface area coverage can vary depending on the thickness of the texture and the skill level of the installer.

The tools required to texture drywall depend on the specific texture being applied.

However, here are some common tools that are typically needed for most drywall texturing jobs:

1. Drywall Mud: This is the primary material used for creating drywall textures. It is a pre-mixed joint compound that can be used to create a variety of textures.
2. Texture Sprayer: This is a tool used to spray the drywall mud onto the surface. Texture sprayers can be rented or purchased from most home improvement stores.
3. Trowel: A trowel is used to apply and manipulate the drywall mud to achieve the desired texture. There are various types of trowels available, each with a different shape and size.
4. Drywall Knife: A drywall knife is used to spread the drywall mud onto the surface, and to scrape away any excess mud.
5. Sandpaper: After the texture has dried, sandpaper can be used to smooth out any rough spots or imperfections.
6. Safety Equipment: When working with drywall mud, it is important to wear safety equipment such as gloves, eye protection, and a respirator to protect yourself from dust and fumes.

Overall, the specific tools needed for a drywall texturing job can vary depending on the texture being applied, as well as the size and complexity of the project.

 

Here are the general steps involved in texturing drywall

1. Preparation: Before you start texturing, you need to prepare the surface by cleaning it thoroughly and making sure it is free of any debris. If needed, patch any holes or cracks in the drywall using joint compound and allow it to dry completely.
2. Mix the drywall mud: Depending on the texture you want to achieve, mix the drywall mud with water to the consistency recommended by the manufacturer. Make sure to mix it thoroughly to avoid any lumps.
3. Apply the mud: Using a trowel or texture sprayer, apply the drywall mud to the surface in a consistent pattern. You can experiment with different techniques to achieve the desired texture, such as using a stippling brush for a popcorn texture or a knockdown knife for a knockdown texture.
4. Allow the texture to dry: Once the texture has been applied, allow it to dry completely according to the manufacturer’s instructions. This usually takes 24-48 hours, depending on the temperature and humidity.
5. Sand the texture: After the texture has dried, use sandpaper to smooth out any rough spots or imperfections. Be careful not to sand too much and remove too much of the texture.
6. Clean up: Once the texture is complete, clean up any remaining debris or drywall mud from the work area.
7. Painting: Once the texture is dry, you can paint over it with your desired color using a paint roller or brush.

Overall, texturing drywall can be a complex process and requires a certain level of skill and experience. It’s important to follow the manufacturer’s instructions carefully and take your time to achieve the desired results. If you’re unsure about any step in the process, it’s always best to consult with a professional to ensure that the job is done correctly.

Cost to Texture Drywall: What You Need to Know

When it comes to renovating or remodeling your home, one of the most common tasks is texture drywall. Texture drywall can help to hide imperfections on your walls, create a unique look, and add value to your home. However, it’s essential to understand the cost of this process before embarking on it.

In this article, we will cover everything you need to know about the cost to texture drywall, including the factors that influence the price and the different types of textures available.

Factors that Affect the Cost to Texture Drywall

Several factors can impact the cost of texture drywall, including the size of the area to be textured, the texture type, and the complexity of the job. The type of paint used can also influence the price, as some paints are more expensive than others.

The Size of the Area to be Textured

The larger the area to be textured, the more expensive the job will be. The cost is usually calculated based on the square footage of the area. The price per square foot can vary depending on the texture type and the complexity of the job.

The Texture Type

Different types of texture can be applied to drywall, such as knockdown, orange peel, popcorn, and smooth. Each texture type has its unique characteristics and requires different techniques, equipment, and materials. The complexity of the texture type will affect the price.

The Complexity of the Job

If the job requires additional preparation work, such as repairing cracks or removing old wallpaper, the cost will increase. Similarly, if the job requires working around obstacles such as light fixtures, the price will go up.

Types of Texture Available

There are several different types of texture available to apply to drywall, each with its unique characteristics. Some of the most common types of texture include:

Knockdown

Knockdown texture is a popular option that involves spraying joint compound onto the wall and then flattening it with a trowel. This results in a textured surface with small indentations.

Orange Peel

Orange peel texture involves spraying joint compound onto the wall and then lightly scraping it with a trowel. This results in a textured surface with small bumps that resemble the skin of an orange.

Popcorn

Popcorn texture is a popular option that involves spraying joint compound onto the wall and then letting it dry. This results in a textured surface with small, irregular bumps.

Smooth

Smooth texture involves applying joint compound to the wall and then sanding it down to create a completely flat surface. This is the most basic type of texture and is often used in modern homes.

Cost Breakdown

Now that you know the factors that influence the cost of texture drywall and the different types of textures available let’s look at the cost breakdown. The cost will depend on the size of the area to be textured and the texture type.

As a rough guide, the cost to texture drywall in a standard-sized room of around 12 x 12 feet can range from $350 to $600. However, the price can increase if the job is more complex or if a more expensive texture type is chosen.

Conclusion

In conclusion, texture drywall is a popular option when renovating or remodeling a home. However, it’s essential to understand the cost of the job before embarking on it. The cost will depend on the size of the area to be textured, the texture type, and the complexity of the job. By understanding these factors, you can make an informed decision about whether to texture